CNC Oxy Fuel Cutting Machine

CNC Oxy Fuel Cutting Machine

We, Balaji CNC cutting machines are a leading manufacturer, supplier, wholesaler and trader of CNC Oxy Fuel Cutting Machine in Satara, Maharashtra, India. We are present an inclusive collection of Plasma Cutting Machine. We supply our product to all over India like pune, Satara, Maharashtra, Buy Small plasma cutting machine in Pune, Maharashtra, Satara, Mumbai, Kalyan, Ambarnath, Thana, Solapur, Amravati, Jalgoan, Aurangabad, Rahimatpur, Mahabaleshwar, Chiplun, Khed, Mahad, Kolhapur, Nanded, Nandurbar, Buldhana, Wardha, Shirwal, Wai, Bhor, Jejuri, Vite, Ichalkaranji, Pimpri, Ahmadnagar, Baramati, Saswad, Phaltan, Karad, Panchgani, Parbhani, Yavatmal, Nagpur, Beed, Nashik, and Ulhasnagar, India etc.

What is CNC Oxy-Fuel Cutting Machine?

CNC Oxy-fuel cutting machine uses a combination of fuel gases and oxygen to cut metals. At this point, a stream of oxygen is trained onto the metal, in turn burning it into a metal oxide. This new metal oxide then flows out and away from the intact material being utilized. Any leftover slag can be wiped or tapped away.

Process of CNC Oxy Fuel Cutting Machine

There are two options in the controller High preheat time and low preheat time when we start cutting first high preheat time start. Material will heat in High Preheat time. After complete of high preheat time low preheat time start. Low preheat time again start to heat the material.

There are two options in the controller High preheat time and low preheat time when we start cutting first high preheat time start. Material will heat in High Preheat time. After complete of high preheat time low preheat time start. Low preheat time again start to heat the material.

Non return valve/Flashback arrester

Near the gas bank flashback arrester or non-return valve should be installed to prevent flame or oxygen-fuel mixture pushed back into both cylinder and risk of the cylinder explode.

Cutting torch

In the gas oxygen torch, there is various type of torch which can cut from 10 mm to up to 250 mm thickness. When it cutting the metal is first heated by the High Preheat in that LPG and Oxygen. For some time high preheat on once plate heated it will automatically go to the low preheat time. Once the sufficient heat is achieved then we start the cutting. If start more heat than material melt. The cutting quality of the oxyfuel cutting machine / flame cutting machine can be improve by using setting the flame of the torch.

How does oxy-fuel work?

Basically, a mixture of oxygen and the fuel gas is used to preheat the metal to its 'ignition' temperature which, for steel, is 700°C - 900°C (bright red heat) but well below its melting point. ... The oxygen jet blows away the slag enabling the jet to pierce through the material and continue to cut through the material.

Uses of CNC Oxyfuel Cutting Machine

Oxy-fuel cutting is used for the cutting of mild steel. Only metals whose oxides have a lower melting point than the base metal itself can be cut with this process. Otherwise, as soon as the metal oxidizes it terminates the oxidation by forming a protective crust.

Oxy-fuel welding (commonly called oxyacetylene welding, oxy welding, or gas welding in the United States) and oxy-fuel cutting are processes that use fuel gases (or liquid fuels such as gasoline) and oxygen to weld or cut metals.

Features of Oxy-fuel Cutting Machine

  • Extremely accurate.
  • The small torch can reach small spots.
  • Possibility to cut very thick materials.
  • Low operational costs (one-tenth of plasma cutting costs).
  • Good cut quality.
  • Smooth, vertical planes of cut.
  • Metallurgical perfect surfaces (oxidized).
  • Carbonizing and hardening within the area of the heat-affected zone.
  • High heat input.
  • Wide range of material thickness.
  • Low cutting speed.