CNC Plasma Controller

CNC Plasma Cutting Machine

Balaji CNC cutting machines are one of the well known Manufacturer, Supplier, Wholesaler and Trader of CNC plasma cutting machine from Satara, Maharashtra, India. We are offering a wide-ranging variety of CNC plasma cutting machine. We supply our product to all over India like pune, Satara, Maharashtra, Buy Small plasma cutting machine in Pune, Maharashtra, Satara, Mumbai, Kalyan, Ambarnath, Thana, Solapur, Amravati, Jalgoan, Aurangabad, Rahimatpur, Mahabaleshwar, Chiplun, Khed, Mahad, Kolhapur, Nanded, Nandurbar, Buldhana, Wardha, Shirwal, Wai, Bhor, Jejuri, Vite, Ichalkaranji, Pimpri, Ahmadnagar, Baramati, Saswad, Phaltan, Karad, Panchgani, Parbhani, Yavatmal, Nagpur, Beed, Nashik, and Ulhasnagar, India

About CNC Plasma Cutting Machine

Early plasma cutters were large, slow, and expensive. Therefore they were mainly used for pattern cutting repetition in mass production mode. Like other machine tools, CNC (Computer Numerical Control) technology was used in plasma cutters from the late 1980s to the early 1990s.

Plasma arc cutting is a melting process in which jets of ionized gas at temperatures above 20,000 째C are used to melt and remove material from the cut. During the process, an electric arc is struck between an electrode (cathode) and work piece (anode).

CNC Plasma cutting configuration

2-dimensional / 2-axis plasma cutting

2 axis plasma cutting is most common part in the CNC Plasma Cutting. In the 2-axis plasma cutting torch is in 90 degrees to the work (plate). Due to the straight cutting torch to the plate cutting quality also improve. Up to 70 mm thickness High powered CNC Plasma Cutting beds are configured in this way.

3-dimensional / 3+ Axis plasma cutting

3 axis Plasma cutting machine can be work on flat plate. The cutting head can be tilt with the 2 axis of the CNC plasma cutting machine. Once we set the angle at the time of nesting this angle is apply through all part of the job for example, we set 40-degree angle to the square job then the 4 side has equal angle torch will move according to the x and y axis. This is basically used in large fabrication structure who wants to avoid the grinding and machining operation. Countersunk holes and chamfer edges of profiled holes are easily cut in the 3-axis machine.

Tube and Section Plasma Cutting Machine

In this tube and section Plasma cutting Machine work piece is rotate in 180 degree and according to this x axis and y axis move as per drawing.

CNC Plasma Cutting Speed chart


Advantage of CNC plasma cutting

A CNC plasma machine uses a plasma cutter to cut thin to thick metals along a multi-axis grid. The CNC method offers an advantage over handheld plasma cutting tools because the cuts are programmed and controlled by a computer rather than by human motion.

  • Wide cutting area can cut sheet metal approx.
  • Wide cutting area can cut sheet metal approx.
  • Fast cutting speed, high efficiency, cutting speed up to 10m/min or more.
  • Cutting accuracy higher than flame cutting, underwater cutting is not deformed; fine plasma cutting is more accurate.

Features of CNC plasma cutting

  • Extremely accurate.
  • Possibility to cut very thick materials.
  • Good cut quality.
  • High heat input.
  • Wide range of material thickness.